Take you to understand the basic composition of office chairs.

Office chair, English office chair, the narrow definition refers to the back chair that people sit on when they work on the desktop in the sitting position, and the broad definition is all office chairs, including executive chairs, middle-level chairs, guest chairs, Staff chairs, conference chairs, visitor chairs, training chairs, ergonomic chairs

1: Casters: ordinary casters, PU wheels (soft materials, suitable for wooden floors, and machine rooms).
2: Chair feet: The thickness of the iron frame directly affects the service life of the chair. Surface treatment: polishing, spray painting, baking paint (surface gloss, not easy to peel off paint), electroplating to delete atlas (wood frame can not be electroplated), the quality of electroplating is good, so it is not easy to rust.
3: Air bar: also called extension bar, used to adjust the height and rotation of the chair.
4: Chassis: hold up the part of the seat, and connect with the gas rod below.
5: Seat: It is composed of wood, sponge and fabric. The quality of wood panels is usually not felt by consumers. Sponge: regenerated cotton, new cotton. 99% of manufacturers use the two together. The thicker and harder it is, the higher the cost. The thickness is appropriate and the hardness is appropriate. Press the seat by hand, Material: hemp, mesh, leather. Plastic frame pressed with net cloth. This type of chair is more breathable.
6: Armrest: Thickness affects the quality.
7: Seat back seat connection (corner code): Seat seat and seat back are separated and connected by steel pipe or steel plate, the steel plate is usually 6mm or 8mm thick. However, steel plates with a width of less than 6cm must be 8mm thick.
8: Chair back: Steel frame frame, plastic frame chair, made of a combination of mesh, with breathability.
9: Lumbar pillow: reflect the comfort of the chair.
10: Headrest: office chairExpress the comfort of the chair.

Post time: Sep-06-2022